|
This front trackbar will allow you to easily center your axle under your Jeep. One turn of the adjuster shifts the axle by approximately 1/16 inch at a time so you may fine tune your axle center very precisely. A perfectly centered axle is important to have for proper steering and "Quick Disconnect" operation.
The body of our trackbar is made from 1.25" x .156 DOM tubing, bent to proper angles for various lifts. A rebuildable "johnny joint" is used at the frame end, which also happens to be greasable. A tapered sleeve is then provided to fill the remaining taper. At the axle end you will find a zinc plated adjuster using the factory OEM style rubber bushing to reduce bushing "noise" transfer. The body is then flat black powder coated for corrosion protection.
|
